Current topics

10-10-22

A2MAC1 and TECOSIM have joined forces to offer unique synergies driving significant value for their customers

Wiesbaden/ Boulogne-Billancourt, 10 October 2022 - A2MAC1, the world leading provider of benchmarking solutions across the automotive industry, and TECOSIM, a specialist in computer-aided engineering, have joined forces to offer unique synergies driving significant value for their customers. The two companies are highly...

read more
A2MAC1 and TECOSIM have joined forces to offer unique synergies driving significant value for their customers
18-11-19

Research into the use of Plexiglas for vehicle glazing

Wiesbaden/ Darmstadt, 13 November 2019. In cooperation with partners from universities and industry, Tecosim has brought the SimPlex project sponsored by the Hessen Agentur agency to a successful conclusion. The aim of the project was to develop a new simulation method to calculate crash behaviour in Plexiglas vehicle g...

read more
Research into the use of Plexiglas for vehicle glazing
03-07-18

Research project: deep learning analyses low-speed crash

Rüsselsheim/Darmstadt, Germany, 3 July 2018. CAE specialist Tecosim is launching a low-speed crash detector research project in conjunction with IoT Venture GmbH. This project uses Internet-of-Things technology to analyse and report low-speed crashes in rental cars in real time. The engineering company is developing al...

read more
Research project: deep learning analyses low-speed crash
29-08-17

Tecosim research project: Safe Plexiglas for car manufacture

Rüsselsheim, 29 August 2017. Tecosim has just launched its SimPlex research project in cooperation with university and industrial partners. This two-year project aims to enhance a new simulation method to calculate crash behaviour in Plexiglas vehicle glazing. Tecosim sees great potential in the material. The developme...

read more
Tecosim research project: Safe Plexiglas for car manufacture
27-03-17

Tecosim white paper on virtual benchmarking

Rüsselsheim, Germany, 25 April 2017. Tecosim, the leading development partner for computer-aided engineering (CAE), has published a white paper on virtual benchmarking. This first professional publication on the topic describes how development times can be reduced further in automotive construction with the aid of full...

read more
Tecosim white paper on virtual benchmarking
20-02-17

Top Job 2017: Tecosim is employer of the year

Rüsselsheim, Germany, 20 February 2017. The engineering company Tecosim has been honoured as the best employer in its size category at the Top Job awards. Dr Torben Birker, Member of the Tecosim Group Management Board, and HR Manager Martina Künzl received the award during a ceremony in Berlin last Friday. Wolfgang Cl...

read more
Top Job 2017: Tecosim is employer of the year
27-11-16

Tecosim at SIMVEC 2016: Faster simulation, greater travel comfort, less weight

Rüsselsheim, Germany, 29 November 2016. TECOSIM's appearance at this year's SIMVEC VDI trade congress focused on greater travel comfort through reduced noise, incorporation of lightweight design and safety requirements and the modern TEC|BENCH and TEC|CONCEPT development processes.

read more
Tecosim at SIMVEC 2016: Faster simulation, greater travel comfort, less weight
13-07-16

Students and Tecosim revved up at Formula Student 2016

Rüsselsheim, Germany, 13 July 2016. The Formula Student Germany (FSG) international design competition will see students competing against one another in homemade racing cars in several disciplines at the Hockenheimring between 9 July and 14 August. Tecosim, specialist for Computer Aided Engineering (CAE), is supportin...

read more
Students and Tecosim revved up at Formula Student 2016
06-06-16

Tecosim: Growth in India

Rüsselsheim, Germany / Bangalore, India, 6 June 2016. Tecosim has embarked on further expansion this year. Employees of the world’s leading development partner for computer-aided engineering (CAE) have moved into a new, larger office premises for its Bangalore location on 2 June. “This move is our response to the ...

read more
Tecosim: Growth in India
26-04-16

Simply experience systems simulation

Rüsselsheim, Germany, 26 April 2016. With the aid of a new online demonstrator on the Tecosim website, engineers can now try out systems simulation using a driver's seat as an example. This interactive application enables engineers to acquire quicker and greater understanding of processes, such as how different paramet...

read more
Simply experience systems simulation
18-04-16

Faster virtual vehicle development – TEC|CONCEPT at Car Body Construction Conference in Hamburg for first time

Rüsselsheim, Germany, 19 April 2016. Tecosim Technische Simulation GmbH and Fast Concept Modelling & Simulation (FCMS) GmbH will be jointly presenting their TEC|CONCEPT process solution for the first time at the Car Body Construction Conference in Hamburg in May. This new method speeds up design definition in the e...

read more
Faster virtual vehicle development – TEC|CONCEPT at Car Body Construction Conference in Hamburg for first time
04-04-16

TECOSIM Expands Management

Rüsselsheim, Germany, 4 April 2016. Tecosim Technische Simulation GmbH expands its management. As of 1 April Martin Westerwald has been appointed new managing director. Within the globally operating Tecosim Group, Tecosim GmbH unites the operating fields of activity of the world leading development partner for Computer...

read more
TECOSIM Expands Management
18-03-16

Client-focused growth – Tecosim opens new location in Graz

Rüsselsheim, Germany, 22 March 2016. World leading development partner in computer-aided engineering (CAE), the Tecosim Group continues to concentrate on client-focused growth as it opens a new location in Graz, Austria on 1 April. "With this further expansion to our branch network, we are responding to clients' i...

read more
Client-focused growth – Tecosim opens new location in Graz
28-01-16

Tecosim donates 5,000 euros to Engineers without Borders

Rüsselsheim, 28 January 2016: The TECOSIM Group, world leading development partner in computer-aided engineering (CAE), has donated 5,000 euros to the aid organisation Engineers without Borders. Jürgen Veith, Member of the Management Board, presented an oversized donation cheque to the organisation at the company's R...

read more
Tecosim donates 5,000 euros to Engineers without Borders
09-11-15

Tecosim research project: calculation time reduced for crash simulations

Rüsselsheim, 12 November 2015. A research project at CAE specialist Tecosim set itself the aim of reducing calculation time for crash simulations. The project was funded by the German Federal Ministry of Economics as part of its Central Innovation Program SME. Engineers at the company’s Munich location used different...

read more
Tecosim research project: calculation time reduced for crash simulations
22-09-15

Virtual benchmarking: reverse engineering by Tecosim

Rüsselsheim, Germany 22 September 2015: "The market for virtual benchmarking is on the increase," affirms Jürgen Veith, member of the management board at Tecosim. The TEC|BENCH virtual benchmarking process forms the centre of Tecosim's presence at EuroCarBody, the international trade conference for vehicle b...

read more
Virtual benchmarking: reverse engineering by Tecosim
21-07-15

New process solution for faster virtual vehicle development

Rüsselsheim, Germany, 21 July 2015: "For the first time, it is now possible to check and optimise a large number of concept designs at an early stage by examining several requirements simultaneously," states Tecosim Member of the Management Board Udo Jankowski in informal talks at Daimler's EDM CAE Forum in S...

read more
New process solution for faster virtual vehicle development
28-06-15

Tecosim top innovator again

Rüsselsheim, Germany, 29 June 2015. Tecosim has been recognised as one of the most innovative medium-sized companies at the German Mid-Size Companies Summit in Essen, Germany. Accompanied by the two Tecosim innovation officers Dr André Backes and August Sattler, Member of the Management Board Dr Torben Birker received...

read more
Tecosim top innovator again
26-03-15

Tecosim points to future trends in electric vehicle crash behaviour

Rüsselsheim, Germany, 27 March 2015: “The special requirements for crash and occupant safety will allow the use of computer aided engineering (CAE) to grow further”, concluded Tecosim Member of the Management Board Udo Jankowski at the opening of the new Fraunhofer centre for Structural Durability and System Reliab...

read more
Tecosim points to future trends in electric vehicle crash behaviour
05-03-15

Creating even greater variety in cars – Tecosim becomes member of German Association of Automotive Industry

Rüsselsheim, Germany, 5 March 2015: TECOSIM Group, a leading global development partner in computer-aided engineering (CAE), has joined the German Association of the Automotive Industry (VDA). The company's new-ly acquired membership underscores the growing significance of specialised development service providers with...

read more
Creating even greater variety in cars – Tecosim becomes member of German Association of Automotive Industry
11-02-15

Tecosim donates 10,000 euros to Terre des Hommes

Rüsselsheim, Germany, 3 February 2015: the TECOSIM Group, a world-leading development partner in computer-aided engineering (CAE), has donated 10,000 euros to the aid agency Terre des Hommes. Tecosim's Management Board presented the symbolic donation cheque at the company's Rüsselsheim headquarters. 'We are obviously ...

read more
Tecosim donates 10,000 euros to Terre des Hommes
13-11-14

Faster simulation: CAE specialist Tecosim presents own CAE software TEC|WRX at SIMVEC 2014

Rüsselsheim, Germany, 19 November 2014. Clients and service providers increasingly focus more closely on the time factor when creating and calculating simulation models. This year's SIMVEC sees Tecosim, the market leader in computer-aided engineering (CAE), premièring a self-developed software which makes simulated te...

read more
Faster simulation: CAE specialist Tecosim presents own CAE software TEC|WRX at SIMVEC 2014
02-09-14

Virtual benchmarking: Tecosim at EuroCarBody 2014

Rüsselsheim, Germany, 2 September 2014. Tecosim's digital simulation experts are focusing their exhibition at EuroCarBody 2014 on their TEC|BENCH virtual benchmarking solution. TEC|BENCH has been setting standards for benchmarking closely integrated into client CAE environments for ten years now. The international Car ...

read more
Virtual benchmarking: Tecosim at EuroCarBody 2014
07-08-14

TEC|BENCH: Video explains virtual benchmarking in 3 minutes

Rüsselsheim, Germany, 3 August 2014. How does the benchmarking process TEC|BENCH work exactly? What advantages does this process offer in contrast to a traditional comparison between two rival products? What information does the method actually deliver? A new, three-minute video from CAE specialist TECOSIM answers thes...

read more
TEC|BENCH: Video explains virtual benchmarking in 3 minutes
03-06-14

Ford presents awards to Tecosim employees

Rüsselsheim/Germany, 3 June 2014. The automotive manufacturer Ford has honoured four employees at CAE specialist Tecosim for their excellent work in different development projects. Over the past few months, three co-workers from Tecosim’s UK company each received an award while an employee from the Cologne branch was...

read more
Ford presents awards to Tecosim employees
07-05-14

More drive comfort thanks to reduced tank noise. Tecosim develops simulation process to test acoustics

Rüsselsheim/Germany, 7 May 2014. Acoustics in passenger compartments have consistently improved over recent years. Nevertheless occupants have now become more aware of other noises like the sloshing sound in the fuel tank. Tecosim has developed an approach to optimising tank structures and integrated obstacles.

read more
More drive comfort thanks to reduced tank noise. Tecosim develops simulation process to test acoustics
24-02-14

Tecosim and Rhein-Main University completed research project "AUTOMEX": Increased efficiency thanks to new software

On Friday, 21 February 2014, Tecosim and Rhein-Main University of Applied Sciences presented the findings from their research project AUTOMEX – automatic extraction of mid-surface outlines from 3D CAD volume models. The project aimed to develop a software application which would remedy a shortcoming in the simulation ...

read more
Tecosim and Rhein-Main University completed research project "AUTOMEX": Increased efficiency thanks to new software
23-01-14

4,200 stamps and 4,200 euros for Terre des Hommes. Tecosim donates one euro for each stamp collected

Rüsselsheim/Germany, 23 January 2014. The Tecosim group collected around 4,200 stamps from all over the world the last ten months. The company has now donated the stamps to the Terre des Hommes aid organisation, which will prepare the stamps and sell on to collectors to raise funds. Additionally Tecosim donate 4,200 eu...

read more
4,200 stamps and 4,200 euros for Terre des Hommes. Tecosim donates one euro for each stamp collected
22-08-13

Ensuring mail is delivered safely: Tecosim simulates crash scenarios for electric vehicle

Rüsselsheim/Aachen, 22 August, 2013. Streetscooter GmbH, a sustainable transport company, has developed an electric vehicle for Deutsche Post. Safety played an important role in development. Streetscooter joined forces with CAE development partner TECOSIM to calculate and simulate different crash scenarios.

read more
Ensuring mail is delivered safely: Tecosim simulates crash scenarios for electric vehicle
15-08-13

‘Open doors!’ at Tecosim in Cologne

Cologne, 16 August, 2013. How is a real Olympic torch developed? How does the flame manage not to go out even when subject to strong winds and heavy rain? What aspects need to be considered to ensure that torch bearers do not get burnt or injured?

read more
‘Open doors!’ at Tecosim in Cologne
16-04-13

Computer with perfect hearing

Cologne/Burscheid, Germany, 16 April, 2013. Enzenauer Flügel-Manufaktur is relying on digital simulation technology to optimise the acoustics in their new grand piano. Engineering company Tecosim is calculating resonance behaviour in the piano's cast frame. The IfG – the Düsseldorf-based Institute of Casting Technol...

read more
Computer with perfect hearing
01-02-13

TECOSIM is top employer

Rüsselsheim, Germany, 1 February, 2013. Engineering company Tecosim has received the coveted Top Job seal of approval. This means that the computer-aided engineering (CAE) market leader is one of 100 best employers among German medium-sized companies. Dr. Torben Birker, member of the Management Board of Tecosim, and HR...

read more
TECOSIM is top employer
12-12-12

TECOSIM - the 2012 company most friendly toward women and families

Ruesselsheim (Germany), 12 December 2012 - Among the companies in the district of North Groß-Gerau, Tecosim is the company most friendly toward women and families. In the category of companies with more than 50 employees, the internationally active technology company headquartered in Rüsselsheim won the competition to...

read more
TECOSIM - the 2012 company most friendly toward women and families
27-11-12

TECOSIM: Image and Internet in new Splendour

Ruesselheim, Germany, November 27, 2012. Tecosim is about to unveil its new image. The main changes include a revamped logo, eye-catching corporate colours and fonts, and a new brand promise, 'Better life by simulation'. With this slogan, this engineering company is highlighting its claim that its development concepts a...

read more
TECOSIM: Image and Internet in new Splendour
05-07-12

TECOSIM develops Olympic torch

Ruesselsheim, Germany / Basildon, UK, July 5, 2012. The most famous torch in the world is currently journeying around Great Britain and Ireland. Over 70 days, 8,000 runners are covering the length and breadth of the UK before the Olympic flame is lit at the official opening ceremony in London on July 27. Engineering com...

read more
TECOSIM develops Olympic torch
11-06-12

TECOSIM awarded 'Job and Family' certificate

Berlin / Ruesselsheim, June 11, 2012. Technology company TECOSIM is receiving the 'Job and Family' certificate from the renowned Hertie Foundation for its family-friendly personnel policy in Berlin today. The certificate is being presented by Dr. Hermann Kues, Parliamentary State Secretary at the Federal Ministry of Fam...

read more
TECOSIM awarded 'Job and Family' certificate