Would you like to stay informed about TECOSIM Group developments? Read news from our company, about our services and about our projects. You can also see which trade fairs and career events that we will be attending here.
19–20 October 2021: TECOSIM at CAE Grand Challenge
TECOSIM is actively participating in the automotive CAE Grand Challenge conference on 19 and 20 October. This event traditionally focuses on the latest challenges in technical computer simulation and takes place in hybrid mode this year – both online and in person at the Congress Park Hanau.
29 and 30 September 2020: TECOSIM at CAE Grand Challenge
TECOSIM experts will be leading two of the total of seven sessions tackling CAE challenges 2020 at the automotive CAE Grand Challenge conference in Hanau on 29 and 30 September 2020. In the accompanying trade exhibition, the engineering company will be centring on its SimPlex lightweight construction material research p...
16 and 17 April 2019: TECOSIM at automotive CAE Grand Challenge
TECOSIM will be present with not one but two lectures at the automotive CAE Grand Challenge symposium in Hanau, Germany, on 16 and 17 April. The engineering company will also be showcasing its specialised service and product portfolio in virtual vehicle development in the accompanying trade exhibition (Booth 1).
26 and 27 March 2019: TECOSIM at Automotive Industry Lightweight Design Summit
This year's Automotive Industry Lightweight Design Summit is being held under the title "The better car" at the Vogel Convention Center in Würzburg on 26 and 27 March. Development partner TECOSIM will be presenting the potentials of virtual benchmarking for lightweight construction and its service portfolio f...
Within the automotive industry, the use of glass fiber reinforced thermoplastic composites, e.g. organo sheets, becomes more and more popular due to weight saving benefits. Organo sheets consist of glass fiber fabrics and a thermoplastic matrix. Thanks to the thermoplastic matrix they can easily be reshaped by heating t...
TECOSIM's new electromagnetic simulation service, lightweight design solutions and the specific requirements for electric vehicle simulation are just one part of the widely varied range that the company is showcasing at the SIMVEC trade congress. The specialist in numerical calculation and simulation is also presenting ...
Jankowski new chairman of the VDA Working Group for Development Service Providers
Udo Jankowski, Member of the Management Board at CAE specialist TECOSIM, is now Chairman of the Working Group for Development Service Providers (DSP) at the German Association of the Automotive Industry (VDA). He thus replaces VDA Managing Director Klaus Bräunig, who set up the working group in 2013 and who goes into r...
TECOSIM at ECB: experience virtual benchmarking live
EuroCarBody (ECB) will see TECOSIM showcasing its innovative TEC|BENCH development process for virtual benchmarking between 16 and 18 October. This product offers development partners both customised individual solutions and attractive, readily available stock models. This annual trade congress is the world's top forum ...
TECOSIM informs visitors about career starts and opportunities
Students and graduates will be able to gain a precise insight into TECOSIM at Stuttgart University's SimTech career fair in June. Company employees will be informing visitors about career starts and opportunities at the globally active engineering partner and leading specialist in computer aided engineering (CAE) during...
The IKOM job fair in Munich sees TECOSIM informing visitors about entry-level posts and career opportunities at the globally active engineering company. Employees will be answering questions on work placements and career starts in the IKOM Arena and at Trade Fair Booth 80.
Students and graduates from Esslingen University will have the opportunity to learn all about TECOSIM on 16 May 2018. The globally active development partner and market leader in computer-aided engineering (CAE) provides exciting topics for work placements and final theses and fascinating posts for career starters.
TECOSIM will be informing visitors about career start opportunities with a development partner and leading specialist in computer-aided engineering (CAE) on Booth C04 at the Karlsruhe Institute of Technology (KIT) job fair.
Hannover Messe trade fair: TECOSIM makes digitisation a live experience
How a component is custom-adapted, optimised and then sent directly to a 3D printer The joint "Lightweight construction from Baden-Württemberg" booth will be showing the future of product development at the Hannover Messe trade fair between 23 and 27 April. TECOSIM assisted in developing the demonstrator mode...
New NVH-methods for robust product development at CAE Grand Challenge
TECOSIM is presenting new methods for recording and optimising vibrations in vehicle bodies in a lecture at this year's Automotive CAE Grand Challenge. The CAE expert will also be showcasing its specialised service and product portfolio for virtual vehicle development at the accompanying trade exhibition (Booth 1) on 17...
TECOSIM at AIX 2018: new ideas for aircraft cabins
TECOSIM will be informing visitors about its aerospace industry service portfolio at the Aircraft Interiors Expo (AIX) in Hamburg between 10 and 12 April. The virtual testing expert will also be presenting new approaches and solutions for faster seat and interior development on the joint Hanse Aerospace Network booth.
New work: TECOSIM presents tomorrow's world of work
As 2017 Employer of the Year, TECOSIM is taking part in the competition organiser's Top Job Benchmark Meeting this year. Sandra Bonow, TECOSIM Human Resources Director, gave a lecture focusing on the changes in the world of work and presented ways to shape such transformation.
Exciting career starts beckon at the globally active engineering company and CAE specialist TECOSIM. Visitors to this year's Bonding Aachen job fair can learn about possibilities for themselves during a lecture and face-to-face consultation at the company's trade fair booth.
27 November 2017: TECOSIM at the Aachen Acoustics Colloquium
Once a year, the Aachen Acoustics Colloquium invites experts to discuss issues related to acoustics and vibrations in automotive development. This year, TECOSIM will be giving a lecture examining topology optimisation. Incorporating NVH load cases can significantly speed up the early development stage in particular.
Benchmark to go: TECOSIM presents benchmarking app at EuroCarBody
TECOSIM will be presenting a newly developed web app as the focus of its presence at this year's EuroCarBody between 17 and 19 October 2017. Thanks to this app, the engineering company now ensures information and 3D animated graphics for available benchmarking models are quickly and easily provided for use.
4 and 5 October 2017: TECOSIM at VirtualCarBody in Bad Nauheim
Advances in virtual vehicle body development are the focus of this year's VirtualCarBody in Bad Nauheim, Germany, on 4 and 5 October. TECOSIM will be highlighting new approaches to vehicle calculation in two lectures and presenting its self-developed benchmarking process TEC|BENCH.
27 September 2017: TECOSIM at SafetyUpDate in Graz
Graz SafetyUpDate will centre on both cross-disciplinary and subject-specific topics related to testing or simulating active and passive safety systems on 26 and 27 September. TECOSIM will be explaining the challenges involved for virtual product development.
TECOSIM at Automotive Safety Summit Shanghai: faster development and detailed benchmarking
TEC|BENCH and TEC|CONCEPT are synonymous with reduced complexity in development and benchmarking. These two modern development processes are at the centre of TECOSIM's appearance at this year's Automotive Safety Summit in Shanghai on 1 and 2 August, when they will be presented in detail. The company will also be showcas...
TECOSIM at Daimler EDM CAE Forum 2017: Safe, yet lighter and faster
Offering the same level of safety with reduced vehicle weight and during high-speed crashes in shorter periods of time are the topics presented on the TECOSIM booth at the Daimler EDM CAE Forum in Stuttgart on 19 and 20 July. The company will be showcasing new methods for reducing computing times and weight in vehicle d...
Interested students and graduates can find out about career opportunities at TECOSIM during IKOM in June. Employees from the globally active engineering company will be answering questions on work placements and career starts at Booth no. 52.
Students from Lipscomb University, Tennessee, came a very long way to take a look at work at TECOSIM and watch engineers in virtual automotive development. By the end of the event, it was clear to everyone taking part that the journey had been worthwhile.
Students and graduates will be able to gain a precise insight into TECOSIM at RWTH Aachen University's Career Day in June. The company will be providing information about work placements, entry-level posts and career opportunities with a development partner and leading specialist in computer-aided engineering (CAE).
Rüsselsheim, Germany, 9 May 2017. TECOSIM, the leading development partner for computer-aided engineering (CAE), has published a white paper on virtual benchmarking. This first professional publication on the topic describes how development times can be reduced further in automotive construction with the aid of fully d...
10 May: Meet & Greet with TECOSIM at Technical University of Munich
TECOSIM will be offering insights into the exciting, varied everyday work life at a development partner and world-leading specialist for computer-aided engineering during this year's “Engineers in practice” series of lectures.
TECOSIM will be appearing at the Karlsruhe Institute of Technology (KIT) job fair at 17 May, where it will provide information on interesting posts for career starters and opportunities for work placements and final theses at Booth A02.
The SafetyUpDate will take place in Aschaffenburg from 16 to 17 May 2017. The speakers are leading experts from government agencies, consumer protection organizations, industry and universities. TECOSIM will present current challenges and new developments in crash and safety simulation.
TECOSIM opens branch in Hamburg with focus on aerospace and wind energy
The TECOSIM Group is opening a new branch in Hamburg on 1 April 2017.
The leading development partner in computer-aided engineering (CAE) will use this new location to coordinate expansion to its aerospace and wind energy business. The company will also be informing trade visitors about its specialised service portfol...
TECOSIM sponsors students with Germany Scholarship
TECOSIM has been funding two new Germany Scholarship beneficiaries at its Munich location since early 2017. The leading CAE engineering partner has been involved in the scholarship programme initiated by the Federal Ministry of Education and Research since 2011.
5 April 2017: TECOSIM to give lecture at automotive CAE Grand Challenge 2017
TECOSIM will be presenting new developments and methods for topology optimisation at this year's CAE Grand Challenge on 5 and 6 April. The company will also be showcasing its specialised service and product portfolio for virtual vehicle development in the accompanying trade exhibition (Booth 1).
Rüsselsheim, Germany, 20 February 2017. The engineering company TECOSIM has been honoured as the best employer in its size category at the Top Job awards. Dr Torben Birker, Member of the TECOSIM Group Management Board, and HR Manager Martina Künzl received the award during a ceremony in Berlin last Friday. Wolfgang Cl...
Tecosim at SIMVEC 2016: Faster simulation, greater travel comfort, less weight
Rüsselsheim, Germany, 29 November 2016. TECOSIM's appearance at this year's SIMVEC VDI trade congress focused on greater travel comfort through reduced noise, incorporation of lightweight design and safety requirements and the modern TEC|BENCH and TEC|CONCEPT development processes.
TECOSIM will be presenting itself at this year's Bonding Aachen career fair. Interested visitors can learn about various career starts at the market leader in computer-aided engineering (CAE) during a lecture or face-to-face conversations at the company's trade fair booth.
22 and 23 November 2016: meet TECOSIM at SIMVEC 2016
TECOSIM is presenting its extensive expertise at SIMVEC 2016, the Association of German Engineers (VDI) congress. The company will be heralding the launch of its anniversary year under the heading "25 years as a CAE pioneer" while also showcasing its extensive product and services portfolio in the trade exhibi...
25 October 2016: TECOSIM presents new options in virtual driving dynamics benchmarking
This year's Global Vehicle Dynamics Conference in Munich (25 to 26 October) sees TECOSIM presenting the current situation in virtual benchmarking. The CAE specialist will also be showcasing advanced approaches and new solutions for comparing driving dynamic characteristics.
Tecosim, the global development leader in computer-aided engineering (CAE), will be placing its focus on the virtual benchmarking process TEC|BENCH again when it attends this year's EuroCarBody. This international vehicle body benchmarking conference takes place in Bad Nauheim, Germany, and will see the company presenti...
28 September 2016: TECOSIM presents its services at SafetyUpdate in Graz
SafetyUpdate in Graz will be providing a comprehensive overview of all relevant new developments in vehicle safety on 27 and 28 September. TECOSIM will play an active part in the conference by giving a lecture and presenting its services and products in the accompanying trade exhibition.
Students and Tecosim revved up at Formula Student 2016
Rüsselsheim, Germany, 13 July 2016. The Formula Student Germany (FSG) international design competition will see students competing against one another in homemade racing cars in several disciplines at the Hockenheimring between 9 July and 14 August. Tecosim, specialist for Computer Aided Engineering (CAE), is supportin...
11 July 2016: TECOSIM presents virtual product development
As part of the series of lectures “Lightweight Design” at the Institute for Product Development (IPEK) in Karlsruhe, TECOSIM is presenting the many advantages of virtual product development by Computer Aided Engineering (CAE).
TECOSIM informs interested students and graduates about career opportunities at a global engineering company at the IKOM job fair. Employees answer questions about internships and entry to the market leader for computer-aided engineering (CAE) at booth no. 38.
TECOSIM, the world's leading engineering partner for computer-aided engineering (CAE), will be presenting careers and opportunities to students and graduates at the Karlsruhe Institute of Technology job fair. The company will be providing information on work placement and final thesis opportunities and interesting posts...
11 May 2016: TECOSIM to showcase company to students at Esslingen Industry Day
Students and graduates from Esslingen University have the opportunity to learn all about TECOSIM on 11 May 2016. The market leader in computer aided engineering (CAE) provides work placements, topics for final theses and interesting posts for career starters.
Interested students and graduates will be able to gain an insight into TECOSIM as a company at the oldest and largest student-organised career fair, konaktiva Darmstadt. The company will be showcasing its services at Booth E 3 at Darmstadt's "darmstadtium" congress centre, informing visitors about the wide ran...
Rüsselsheim, Germany, 26 April 2016. With the aid of a new online demonstrator on the Tecosim website, engineers can now try out systems simulation using a driver's seat as an example. This interactive application enables engineers to acquire quicker and greater understanding of processes, such as how different paramet...
This year's SafetyUpDate will be enlightening attendees about the latest requirements and strategies in vehicle safety on 10 and 11 May in Aschaffenburg. TECOSIM will be offering a lecture which examines new challenges and developments in crash and safety simulation.
Faster virtual vehicle development – TEC|CONCEPT at Car Body Construction Conference in Hamburg for first time
Rüsselsheim, Germany, 19 April 2016. Tecosim Technische Simulation GmbH and Fast Concept Modelling & Simulation (FCMS) GmbH will be jointly presenting their TEC|CONCEPT process solution for the first time at the Car Body Construction Conference in Hamburg in May. This new method speeds up design definition in the e...
Rüsselsheim, Germany, 4 April 2016. Tecosim Technische Simulation GmbH expands its management. As of 1 April Martin Westerwald has been appointed new managing director. Within the globally operating Tecosim Group, Tecosim GmbH unites the operating fields of activity of the world leading development partner for Computer...
Client-focused growth – Tecosim opens new location in Graz
Rüsselsheim, Germany, 22 March 2016. World leading development partner in computer-aided engineering (CAE), the Tecosim Group continues to concentrate on client-focused growth as it opens a new location in Graz, Austria on 1 April. "With this further expansion to our branch network, we are responding to clients' i...
TECOSIM sponsors students with Germany Scholarship another year
TECOSIM has shown its commitment to the German Federal Ministry of Education and Research's "Deutschlandstipendium" scholarship programme for a number of years. Since the start of 2016, the company has been financing four new scholarship awardees in Munich and Rüsselsheim.
12 and 13 April 2016: TECOSIM to give lecture at automotive CAE Grand Challenge 2016
The current challenges in computer-aided engineering (CAE) are the focus of this year's automotive CAE Grand Challenge in Hanau, Germany, on 12 and 13 April. Leading CAE engineering partner TECOSIM will be highlighting new approaches and methods in virtual vehicle development in three lectures, using its self-developed ...
14 March 2016: TECOSIM at Automotive Industry Lightweight Design Summit
This year's automotive industry Lightweight Design Summit takes place under the heading "Knowing when to use lightweight design". TECOSIM will be presenting a look at the future role of simulation in the further development of this key field in automotive design during a specialist lecture.
28 January 2016: Tecosim donates 5,000 euros to Engineers without Borders
The TECOSIM Group, world leading development partner in computer-aided engineering (CAE), has donated 5,000 euros to the aid organisation Engineers without Borders. Jürgen Veith, Member of the Management Board, presented an oversized donation cheque to the organisation at the company's Rüsselsheim headquarters. "...
5 January 2016: TECOSIM presents variety and capacity for innovation in numerical simulation at Humboldt University in Berlin
As part of the research seminar "Mathematical modelling and numerical simulation" at the Department of Mathematics at Humboldt University in Berlin, TECOSIM will be informing participants about the varied, stimulating tasks involved in numerical simulation. The company will use TEC|BENCH, the only fully compre...
TECOSIM will be presenting itself at this year's Bonding Aachen career fair. Interested visitors can learn about career starts at the market leader in computer-aided engineering (CAE) during a lecture or face-to-face conversations at the company's trade fair booth.
Tecosim research project: calculation time reduced for crash simulations
Rüsselsheim, 12 November 2015. A research project at CAE specialist Tecosim set itself the aim of reducing calculation time for crash simulations. The project was funded by the German Federal Ministry of Economics as part of its Central Innovation Program SME. Engineers at the company's Munich location used different m...
12 November 2015: TECOSIM at 17th Baden-Württemberg Automotive Supplier Day
Experts from the automotive industry and the worlds of business and politics will be presenting developments and trends in the sector at the 17th Baden-Württemberg Automotive Supplier Day in November. TECOSIM, a specialist CAE service provider, will be showcasing its extensive portfolio in calculation and simulation at...
Wolfgang Woost becomes new General Manager at TECOSIM Munich branch
TECOSIM’s Munich office has a new General Manager in Wolfgang Woost from 1 November 2015. This 40-year-old engineer previously held a managerial post at the German-French engineering company ELAN-AUSY in Hamburg.
Virtual benchmarking: reverse engineering by Tecosim
Rüsselsheim, Germany 22 September 2015: "The market for virtual benchmarking is on the increase," affirms Jürgen Veith, member of the management board at Tecosim. The TEC|BENCH virtual benchmarking process forms the centre of Tecosim's presence at EuroCarBody, the international trade conference for vehicle b...
The world's most important automotive trade fair is set to take place in Frankfurt between 17 and 27 September – the 66th International Motor Show (IAA). Some 1,000 exhibitors from 40 countries will be presenting the latest trends and technological highlights in the 2015 automotive industry and offering exciting prosp...
State Secretary for Europe, Mark Weinmeister, visits TECOSIM
The Hessian State Secretary for European Affairs Mark Weinmeister visited TECOSIM's company headquarters in Rüsselsheim on 12 August. As part of his summer travels he wants to find out about Hessian companies that are active beyond the borders of the Land. He is also interested in issues relating to digitisation and ho...
New process solution for faster virtual vehicle development
Rüsselsheim, Germany, 21 July 2015: "For the first time, it is now possible to check and optimise a large number of concept designs at an early stage by examining several requirements simultaneously," states Tecosim Member of the Management Board Udo Jankowski in informal talks at Daimler's EDM CAE Forum in S...
22 July: TECOSIM presents new CAE process solution at Daimler's EDM CAE Forum
CAE specialist TECOSIM is presenting TEC|CONCEPT, a new process solution for faster virtual vehicle development at the EDM CAE Forum taking place on 22 and 23 July. This new type of analysis and recalculation method for complete vehicle or individual module designs is being showcased both as part of the accompanying tra...
TECOSIM is to showcase its operations on Booth 9 at IKOM. Interested students and graduates can find out about the variety of tasks undertaken at TECOSIM, the market leader in computer-aided engineering.
10 June 2015: Lecture at Automotive Engineering Congress 2015
With a focus on the "body process chain," this year's Automotive Engineering Congress is an ideal platform for exchanging information and ideas with leading experts in body construction. TECOSIM will be presenting the advantages of virtual benchmarking in a lecture.
10 June 2015: TECOSIM to lecture at Vehicle Acoustics Symposium
'Current developments in NVH calculation' is this year's topic for the Vehicle Acoustics Symposium at the Haus der Technik in Essen on 9 and 10 June. TECOSIM is taking part with a lecture on 'Virtual benchmarking of NVH and acoustic properties.
This year's SafetyUpDate will be enlightening attendees about the latest requirements and strategies in vehicle safety on 20 and 21 May. TECOSIM will be offering a look at new challenges in crash and safety simulation in a lecture.
Interested students and graduates will be able to gain an insight into TECOSIM as a company at the oldest and largest student-organised career fair again this year. The company will be showcasing its services at Booth A 7 in Darmstadt's "darmstadtium" congress centre, informing visitors about the wide range of...
TECOSIM will be attending Bonding Dresden careers fair with its own booth this year. Employees from the company will be pleased to answer any questions from interested visitors and will be providing information about career start options with the market leader for computer aided engineering (CAE).
27 March 2015: Tecosim points to future trends in electric vehicle crash behaviour
“The special requirements for crash and occupant safety will allow the use of computer aided engineering (CAE) to grow further”, concluded Tecosim Member of the Management Board Udo Jankowski at the opening of the new Fraunhofer centre for Structural Durability and System Reliability.
31 March 2015: TECOSIM to give lecture at automotive CAE Grand Challenge
The current challenges in computer aided engineering (CAE) are the focus of this year's automotive CAE Grand Challenge. One main topic centres on the latest developments in airbag simulation. A lecture by TECOSIM is also included in the programme.
Creating even greater variety in cars – Tecosim becomes member of German Association of Automotive Industry
Rüsselsheim, Germany, 5 March 2015: TECOSIM Group, a leading global development partner in computer-aided engineering (CAE), has joined the German Association of the Automotive Industry (VDA). The company's new-ly acquired membership underscores the growing significance of specialised development service providers with...
Contemporary product development would be unthinkable without computer-aided engineering, also referred to as calculation and simulation. In the past, companies often used to design products based on experience or estimation formulas, but knowledge-based virtual development (CAE) has been standard practice in the automo...
15 October 2014: TECOSIM to give lecture at SICOS BW information event
SICOS BW GmbH is inviting companies to an event under the heading 'HPC simulation for medium-sized companies' to exchange ideas on high-performance computing (HPC) on 15 October 2014. A lecture by TECOSIM is also included in the programme.
TECOSIM will be presenting itself to interested students and graduates at its booth at IKOM career fair. The engineering development partner's employees will be providing information on entry-level options and work placements in the company.
TECOSIM will be attending the Bonding Karlsruhe careers fair with its own booth. Employees from the company will be pleased to answer any questions from interested visitors and will be providing information about career start options with the CAE specialist.
Students and graduates from Esslingen University and other universities will have the chance to learn about TECOSIM on 21 May 2014. A specialist in computer-aided engineering, the company offers work placements, topics for final theses and interesting entry-level posts on a regular basis.
7 May 2014: Students meet TECOSIM at Konaktiva Darmstadt
On 7 May 2014, TECOSIM is present at Konaktiva Darmstadt and offers interested students and graduates the opportunity to get to know the company at the darmstadtium science and congress centre in Darmstadt (Germany). Employees are available to respond to any questions at Booth B2.
Lecture on fluid-structure interaction at automotive CAE Grand Challenge
TECOSIM support the programme yet again at the automotive CAE Grand Challenge: Dipl.-Ing. Lars Eilers gives a lecture on „Validation of sound pressure level using Fluid-Strcture-coupled analysis with influence of local damping effects“
Industriepreis 2014: AUTOMEX software among 'Best of' solutions
The Industriepreis, a German industry award, was presented in 14 categories at this year's Hanover Fair. Developed by TECOSIM and Rhein-Main University of Applied Sciences, the AUTOMEX software application managed to rank among the top 100 in the IT and software solutions category and received the Best of Industriepreis...
11 April 2014: TECOSIM at “Mathematiker in der Praxis Symposium” at Darmstadt University of Applied Sciences
Students at Darmstadt University of Applied Sciences will gain insight into day-to-day professional life from former fellow students at the MIPS – “Mathematiker in der Praxis Symposium” (Mathematicians in Professional Working Life Symposium). The programme also includes a lecture on working life by TECOSIM.
6 March 2014: TECOSIM to hold lecture at Automotive in Mittelhessen
The Automotive in Mittelhessen event series takes place again at the Technische Hochschule Mittelhessen - University of Applied Sciences in Friedberg on 6 March 2014. The programme also includes a lecture by TECOSIM. Martin Westerwald, General Manager at TECOSIM Rüsselsheim, will speak about CAE – Indispensable in ev...
27 February 2014: India after the euphoria: lecture at Rhine-Neckar CCI one-day economic conference
The Rhine-Neckar CCI's One-Day Economic Conference on India 2014 will see German companies exchanging information on the business environment in India. Experts will report on their experiences of trading with the country. A lecture by TECOSIM is also included in the programme.
3 December, 2013: Students meet TECOSIM at Bonding Aachen
Students and graduates will have the opportunity to become acquainted with TECOSIM during the Bonding Aachen job fair on 3 December 2013. Employees from the engineering company will inform visitors about current vacancies, career starts and development opportunities at TECOSIM.
TECOSIM will be present at the Job Fair „Hochschulkontaktmesse HOKO” in Munich on 7 November, 2013. Students and graduates will be able to inform at booth B11 about the career starts at the CAE development partner.
31 October, 2013: TECOSIM at North German Simulation Forum in Hamburg
The North German Simulation Forum takes place for the eighth time on 31 October 2013. In addition to lectures, there is also a small trade exhibition, where TECOSIM will be showcasing its services on a booth.
TECOSIM board member Jankowski and Hessian State Secretary honour re-entry-friendly companies
The winners are in for the '2013 WieDa best company for re-entry in Hesse'. Petra Müller-Klepper, State Secretary in the Hessian Ministry of Social Affairs and sponsor of the competition, presented the award to Doris Schüssler Consulting, Frankfurt and wibas GmbH, Darmstadt at a ceremony at Eberbach Abbey (Rheingau-Ta...
Focus on trend material – TECOSIM joins CFK-Valley Stade competence network
TECOSIM joined the CFK-Valley Stade e.V. competence network for high-performance composites in July 2013. The CAE specialist has been focusing on the use of carbon-fibre-reinforced composites for a number of years now, a material which is gaining an increasingly important role in product development due to a prime consi...
22 till 24 October, 2013: TECOSIM at EuroCarBody 2013
TECOSIM will be presenting itself at the 15th Global Vehicle Body Benchmarking Conference between October 22 and 24, 2013. The engineering company's showcase will focus on its benchmarking services and its TEC|BENCH product.
Daimler EDM CAE forum: TECOSIM provides insight into virtual benchmarking
Daimler is holding its 10th EDM CAE Forum in the International Congress Center (ICS) at Messe Stuttgart on July 10 and 11. TECOSIM is giving a specialist lecture on TEC|BENCH: benchmarking with CAE methods. The CAE specialist will also be providing information on this solution at the trade exhibition.
Students and graduates will be able to find out about entry-level posts and career opportunities at TECOSIM on 4 June, 2013, when the Bonding career fair takes place in the Gartenhalle in Karlsruhe, Germany.
4 June, 2013: Lecture „Virtual Benchmarking TEC|BENCH“ at the Automotive Engineering Conference
The Automotive Engineering Conference will take place in Nuremberg/Germany from 4 till 5 June 2013. TECOSIM will hold a lecture about „Virtual Benchmarking TEC|BENCH: Experiences in correlating simulation models“.
Udo Jankowski, Member of Management Board at TECOSIM, is serving on the independent jury for the competition 'WieDa - Best company for career re-entry in Hessen 2013.' Participation on this decision panel provides further proof of TECOSIM's commitment to reconciling work and family life.
Bonding Dresden on 30 April, 2013 will provide students and graduates with the chance to find out about entry-level job opportunities at TECOSIM. Company employees will be answering questions at Stand L22 and will explain a calculation engineer's duties at the CAE specialist's locations.
25 April, 2013: Specialist lecture on „Crash safety design in electric vehicles“ at DVM conference
This year's DVM conference takes place in Berlin between 24 and 26 April under the heading „Electric transport - Reliability and safety in electric vehicles“. A specialist lecture from TECOSIM is also included in the conference programme: Dipl.-Ing. Udo Jankowski, member of TECOSIM management board, is reporting on ...
At the event automotive CAE Grand Challenge, Dr Martin Müller-Bechtel gives a lecture that examines questions related to the "Optimization method for improving the correlation of experimental and numerical modal analysis".
TECOSIM is appearing at the Hanover Fair as part of the CAE Forum's presence with a lecture on "Crash Behaviour and Occupant Safety in Electric Vehicles: Challenges and Methods of Resolution". As company-, sector- and solver-independent platform for simulation experts, the CAE Forum is taking part in the Hanov...
"Innovative computational fluid dynamics (CFD) applications in product development - areas of use, methods and limitations" - NAFEMS is holding a seminar on this interesting topic in Wiesbaden on 18 and 19 March, 2013.