Fairs and Events - Archive

TECOSIM has presented at the following events with a booth and / or lecture. An overview of the shares held by TECOSIM lectures can be found here.

2016

EuroCarBody 2016

18 to 20 October 2016
Hotel Dolce, Bad Nauheim/ Germany

Presence in exhibition

Grazer Safety Update 

27 to 28 September 2016
TU Graz, Graz/Austria

Lecture by Qualified Engineer (Dipl.-Ing.) Mark Gevers, TECOSIM Technische Simulation GmbH: "Simulation - Status of the simulation models crash and safety"

Presence in exhibition

Karosseriebautage Hamburg

10 to 11 Mai 2016
Hamburg / Germany

Lecture by Professor Dr Klemens Rother, University of Applied Sciences Munich, Dr Werner Pohl, FCM&S GmbH, Dr David Schneider, Dynardo GmbH and Qualified Engineer (Dipl.-Ing.) Udo Jankowski, Member of Management Board TECOSIM Venture AG: "Efficient computer-based development of chassis concepts"

Presence in exhibition: joint participation booth with Fast Concept Modelling & Simulation (FCMS) Gmbh

SafetyUpDate

 

 

10 to 11 May 2016
Town Hall Aschaffenburg

Lecture by Qualified Engineer (Dipl.-Ing.) Mark Gevers, TECOSIM Technische Simulation GmbH: "Simulation"

automotive CAE Grand Challenge

12 to 13 April 2016
Congress Park, Hanau / Germany

Lecture by Dr André Backes, TECOSIM Technische Simulation GmbH: „Virtual benchmarking of NVH and acoustic performance

Lecture by Dr Claus Bayreuther, TECOSIM Technische Simulation GmbH: „Parameterized optimization process with TEC|CONCEPT“

Lecture by Dr Claus Bayreuther, TECOSIM Technische Simulation GmbH: „Achieving lightweight design of wound filament reinforced composites through perfect interaction of simulation and design“

Presence in exhibition: Booth 1

Lightweight Design Summit
Automobil Industrie

14 to 15 March 2016
Würzburg / Germany

Lecture by Qualified Engineer (Dipl.-Ing.) Udo Jankowski, Member of Management Board TECOSIM Venture AG: „Lightweight design and simulation: The perfect marriage“

2015

Zuliefertag Automobil Baden-Württemberg

12 November 2015
Haus der Wirtschaft, Stuttgart/ Germany

Presence in exhibition

EuroCarBody 2015

20 to 22 October 2015
Hotel Dolce, Bad Nauheim/ Germany

Presence in exhibition

Daimler EDM CAE Forum 2015

22 to 23 Juli 2015
ICS Internationales Congresscenter, Stuttgart / Germany

Lecture „Process improvement in CAE

Presence in exhibition

NAFEMS World Congress 2015

21 to 24 June 2015
Manchester Grand Hyatt, San Diego / USA

Lecture by Qualified Engineer (Dipl.-Ing.) Udo Jankowski, Member of Management Board TECOSIM Venture AG and Dr. Martin Müller-Bechtel, Technische Simulation GmbH: "Let´s make Benchmarking more virtual"

European LS-DYNA Conference 2015

15 to 17 June 2015
Würzburg / Germany

Lecture by Qualified Engineer (Dipl.-Ing.) Damaso Lopez-Ruiz, TECOSIM Technische Simulation GmbH: „CAE Validation Study of a Side Window Impact using Plexiglas Materials"

Automotive Engineering Congress 2015

9 to 10 June 2015
Exhibition Centre, Nuremberg / Germany

Lecture by Dr Martin Müller-Bechtel, TECOSIM Technische Simulation GmbH: „Hardware benchmarking goes virtual"

5th Tagung Fahrzeugakustik

9 to 10 June 2015
Haus der Technik, Essen / Germany

Lecture by Dr André Backes, TECOSIM Technische Simulation GmbH: "Virtual benchmarking of NVH and acoustic properties"

SafetyUpDate

 

 

20 to 21 May 2015
Town Hall Aschaffenburg

Lecture by Qualified Engineer (Dipl.-Ing.) Mark Gevers, TECOSIM Technische Simulation GmbH: "Simulation"

IHK Darmstadt

India Evening

19. May 2015 IHK Darmstadt Rhein Main Neckar, Darmstadt/ Germany

Lecture by Qualified Engineer (Dipl.-Ing.) Udo Jankowski, Member of Management Board TECOSIM Venture AG: "What is so different about India? A short field report on setting up a successful subsidiary in India"

automotive CAE Grand Challenge

31 March to 1 April 2015
Congress Park, Hanau / Germany

Lecture by Qualified Engineer (Dipl.-Ing.) Sigrid Horz, TECOSIM Technische Simulation GmbH: "Benefit of the Coupled Euler Lagrange Method in side airbag development"

Grand Opening "Zentrum für Systemzuverlässigkeit / Elektromobilität ZsZ-e"

Symposium "Traktion-E"

26 to 27 March 2015 Fraunhoher LBF-Campus, Darmstadt / Germany

Lecture by Qualified Engineer (Dipl.-Ing.) Udo Jankowski, Member of Management Board TECOSIM Venture AG: "Crash behaviour in electric vehicles - Where is the journey taking us?"

2014

SIMVEC 
International VDI Conference:
Simulation and testing in vehicle development

18 and 19 November 2014
Baden-Baden / Germany

Lecture by Dr. André Backes, TECOSIM Technische Simulation GmbH: „AUTOMEX - beschleunigter Aufbau von Finite-Elemente-Modellen mit neuer Software“ (AUTOMEX - new software fills the gap and speeds up creation of finite element models)

Lecture by Dipl.-Ing. Mark Gevers, TECOSIM Technische Simulation GmbH: „Modellierung von Verbundsicherheitsglas für die Fahrzeugsicherheitssimulation mittels XFEM“ (Modelling of laminated safety glass for vehicle safety simulation in XFEM
)

Presence in exhibition: Booth 35 (1. Floor)

EuroCarBody 2014
16th Global Car Body Benchmarking-Conference

21 to 23 October 2014
Bad Nauheim / Germany

Presence in the exhibition: Booth 17 (gallery). Further information about the exhibition presentation of TECOSIM is provided here.

Karosseriebautage Hamburg
13th ATZ Conference

14 to 15 Mai 2014
Hamburg / Germany

Lecture by Dipl.-Ing. Bastian Marx, TECOSIM Technische Simulation GmbH: „Crash-Sicherheit von Elektrofahrzeugen: Herausforderungen und Lösungsansätze“ (Crash-safety of electric vehicles: challenges and methods of resolution)

„Automotive in Mittelhessen

6th March 2014
University of Applied Sciences Technische Hochschule Mittelhessen, Campus Friedberg, Wilhelm-Leuschner-Strasse 10, Room H00.01

Lecture of Dipl.-Ing. Martin Westerwald, TECOSIM Technische Simulation GmbH: „CAE – unverzichtbar im Entwicklungsalltag und als Innovationstreiber“ (CAE - Indispensable in everyday development work and as a driving force for innovation)

automotive CAE Grand Challenge

15 to 16  April 2014
Congress Park Hanau / Germany

Lecture by Dipl.-Ing. Lars-Eilers, TECOSIM Technische Simulation GmbH: „Validation of sound pressure level using Fluid-Strcture-coupled analysis with influence of local damping effects“

India Business Day 2014 at Chamber of Industry and Commerce Rhein-Neckar
„India after the Euphoria“

27 February 2014
Mannheim / Germany

Lecture by Dipl.-Ing. Udo Jankowski, Member of Management Board TECOSIM Venture AG: „Aus der Unternehmenspraxis: Verkaufsgespräche mit indischen Kunden“ (Company Practice: Sales Meetings with Indian Clients)

2013

8th North German Simulation Forum

31 October 2013
Hamburg University of Technology (TUHH) / Building G

Information booth in the exhibition

EuroCarBody 2013
15th Global Car Body Benchmarking-Conference

22 to 24 October 2013
Bad Nauheim / Germany

Information booth in the exhibition, booth 5 (gallery). Further information about the exhibition presentation of TECOSIM is provided here.

Daimler EDM CAE-Forum

10 to 11 July 2013
ICS - International Congress Center Stuttgart (Germany)

10 July 2013: Lecture by Dipl.-Ing. Bernd Hapke and Dipl.-Ing. Thomas Brandt, TECOSIM Technische Simulation GmbH: „TEC|BENCH: Benchmark by using CAE-methods“. Booth at the accompanying exhibition.

Automotive Engineering Congress

4 to 6  June 2013
Messe Nuremberg (Germany)

Lecture by Dr.-Ing. Martin Müller-Bechtel, TECOSIM Technische Simulation GmbH: „Virtual Benchmarking TEC|BENCH: Experiences in correlating simulation models“

DVM Conference 2013
Electro-mobility -
Reliability and safety in electric vehicles

24 to 26 April 2013
Bundesanstalt für Materialforschung und -prüfung, Berlin / Germany

Lecture by Dipl.-Ing. Udo Jankowski, Dipl.-Ing. Dirk Kalka, Dipl.-Ing. Bastian Marx, TECOSIM Technische Simulation: „Herausforderungen in der Crashauslegung von Elektrofahrzeugen“ (Challenges in the design of electric vehicles crash)

automotive CAE Grand Challenge 2013

10 to 11 April 2013
Congress Park Hanau / Germany

Lecture of Dr.-Ing. Martin Müller-Bechtel, TECOSIM Technische Simulation GmbH: „Optimasation method for improving the correlation of experimental and numerical modal analysis, industrial requirements NVH analysis“

Hannover Messe
Area Digital Factory

10 April 2013
Hannover Messe Hall 7, Booth E04 (joint booth CAE-Forum)

Lecture of Dipl.-Ing. Bastian Marx, TECOSIM Technische Simulation GmbH: „Crash Behaviour and Occupant Safety in Electric Vehicles: Challenges and Methods of Resolution“

NAFEMS Seminar
Innovative Applications of Computational Fluid
Dynamics (CFD) in Product Development

18 to 19 March 2013
Wiesbaden / Germany

Lecture by Dipl.-Ing. Matthias Heinz, TECOSIM Technische Simulation: „The Olympic Torch - Fire up by simulation. Use of CFD for the development of the Olympic Torch“

Conference "Fahrzeugakustik" (Vehicle acoustics)
Current developments in NVH-calculation

 

29 to 30 January 2013
Haus der Technik, Essen / Germany

Lecture by Dipl.-Ing. Matthias Heinz, TECOSIM Technische Simulation GmbH: „Akustische Auslegung von Reinluftresonatoren durch numerische Simulation“ (Design of acoustic resonators by means of numerical simulation)

2012

CAE - a Critical Technology in 
Lightwight Construction 

Practical seminar organised by Carhs in 
cooperation with the Aachen University of Applied Science

13 to 14  November 2012
Novotel Aachen / Germany

Lecture by Dipl.-Ing. Mark Gevers, TECOSIM Technische Simulation GmbH: „Innovative Lightweight Construction via CAE Integration“

SIMVEC
International VDI Conference
Analysis, Simulation and Testing in
the Automobile Manufacturing Industry

20 to 21  November 2012
Kongresshaus Baden-Baden / Germany

Trade exhibition: booth 7 (ground floor)

EuroCarBody 2012
14th Global Car Body Benchmarking-Conference

16 to 18 October 2012
Bad Nauheim / Germany

Exhibition: Booth 16 (Gallery)