TECOSIM presents current research results on a regular basis and provides information about the latest trends and developments in numerical calculation and simulation. Find out more about lectures by TECOSIM specialists over recent years here. There is a selection of presentations for download at the bottom of the page. Our Corporate Communications department will be pleased to help you if you require more information or wish to make contact in person.
Current Events
2016
Construction engineers in the automotive industry - finite elements beyond structural analysis Lecture as a part of the programme for the "Structural Statics and Dynamics, Structural Concrete and Steel Construction BMS Colloqium" at RWTH Aachen, Germany on 5 July 2016. Speaker: Moritz Conze, qualified engineer (Dipl.-Ing.), TECOSIM Technische Simulation GmbH
Can 3D xFK winding techniques revolutionise lightweight design in a perfect combination between simulation and design? Lecture as part of the 4th CAE Forum in Landshut, near Munich, on 10 May 2016 Lecturer: Dr Claus Bayreuther, TECOSIM Technische Simulation GmbH
Effiziente rechnergestützte Entwicklung von Karosseriekonzepten in Rahmenbauweise / Efficient, computer-based development of body-in-frame design concepts Lecture as a part of the programme for the 10th Karosseriebautage in Hamburg, Germany, between 10 and 11 May 2016. Speaker: Professor Dr Klemens Rother, University of Applied Sciences Munich, Dr Werner Pohl, FCM&S GmbH, Dr David Schneider, Dynardo GmbH and Qualified Engineer (Dipl.-Ing.) Udo Jankowski, Member of Management Board TECOSIM
Simulation Lecture as a part of the programme for the SafetyUpDate in Aschaffenburg, Germany between 10 to 11 May 2016. Speaker: Mark Gevers, qualified engineer (Dipl.-Ing.), TECOSIM Technische Simulation GmbH
Parameterized optimization process with TEC|CONCEPT Lecture as a part of the programme automotive CAE Grand Challenge in Hanau, Germany, between 12 to 13 April 2016. Speaker: Dr Claus Bayreuther, TECOSIM Technische Simulation GmbH
Achieving lightweight design of wound filament reinforced composites through perfect interaction of simulation and design Lecture as a part of the programme automotive CAE Grand Challenge in Hanau, Germany, between 12 to 13 April 2016. Speaker: Dr Claus Bayreuther, TECOSIM Technische Simulation GmbH
The lecture transcript can be provided on request. Please contact c.kokew(at)ven.tecosim.com
Lightweight design and simulation: The perfect marriage Lecture as a part of the programme for the Lightweight Design Summit in Würzburg, Germany, between 14 and 15 March 2016. Speaker: Qualified Engineer (Dipl.-Ing.) Udo Jankowski, Member of Management Board TECOSIM
Virtuelles benchmarking - Numerische Simulation in der Praxis / Virtual benchmarking - Numerical simulation in practice Lecture at the Humboldt-University in Berlin on 5 January 2016. Speaker: Dr André Backes, TECOSIM Technische Simulation GmbH
