Lectures in 2012

You will find an overview of lectures given in 2012. You can access available downloads at the end of the page.

Innovative light weight through CAE-Integration
Lecture at the "Leichtbau-Gipfels 2012" on 14 March 2012 in Wuerzburg / Germany.
Speaker: Dipl.-Ing. Udo Jankowski, TECOSIM Venture AG

Multi-Disciplinary Design Optimization with Matlab in a Time Constrained Development Process
Lecture at the MathWorks Automotive Conference on 17 April 2012 in Stuttgart / Germany.
Speakers: Hessel van Dijk und Dr. Michel Paas, Ford Motor Company / Dipl.-Ing. Nadja Wirth, TECOSIM Technische Simulation GmbH

Study of large non-linearities in the form of displacements and contact in an operational stability calculation using a ball joint as an example
Lecture at the German NAFEMS-Conference on 9 May 2012 in Bamberg / Germany.
Speaker: Dipl.-Ing. Torsten Kroschwald, TECOSIM Technische Simulation GmbH

Download in German available

Computational Fluid Dynamics in the Chemical and Process Industry
Lecture at the 15. Koethener Ruehrer-Kolloquium on 14 June 2012 in the Technology Centre in Koethen / Germany.
Speaker: Dipl.-Ing. Wilfried Schierholz, TECOSIM Technische Simulation GmbH

Download in German available

Advanced laminated glass modelling for safety FEA
Presentation of the results of a R&D-project at the conference "Absicherung von Fahrzeugeigenschaften 2012" on 19 June 2012 in Bad Nauheim / Germany.
Speaker: Dipl.-Ing. Mark Gevers, TECOSIM Technische Simulation GmbH 

Case Study

TEC|BENCH Virtuelles Benchmarking - Experiences with the correlation of simulation models
Lecture at LS-Dyna Forum 2012 on 10 October 2012 in Ulm / Germany.
Speaker: Dr.-Ing. Martin Müller-Bechtel, TECOSIM Technische Simulation GmbH

Downloads