Lectures in 2016

You will find an overview of lectures given in 2016. You can access available downloads at the end of the page.

FE based generation of modal substructure tire models for use in full vehicle NVH simulations
Lecture as part of the programme at the SIMVEC in Baden-Baden, Germany on 23 November 2016.
Speaker: Torsten Kroschwald, TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com 

Vehicle dynamics benchmarking through reverse engineering TEC|BENCH
Lecture as part of the programme at the Global Vehicle Dynamics Conference in München, Germany on 25 October 2016.
Speaker: Dr Martin Müller-Bechtel, TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com

Simulation - Status of the simulation models crsah and safety
Lecture as part of the programme at the SafetyUpdate in Graz, Austria on 28 September 2016.
Speaker: Mark Gevers, TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com 

Virtual product engineering
Lecture at the Institute of Product Engineering (IPEK), a research institution at the Karlsruhe Institute of Technology (KIT) in Karlsruhe, Germany on 10 July 2016.
Speakers: Dr Robert Dannecker and Bernd-Ulrich Hapke, TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com 

Construction engineers in the automotive industry - finite elements beyond structural analysis
Lecture as a part of the programme for the "Structural Statics and Dynamics, Structural Concrete and Steel Construction BMS Colloqium" at RWTH Aachen, Germany on 5 July 2016.
Speaker: Moritz Conze, qualified engineer (Dipl.-Ing.), TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com 

Can 3D xFK winding techniques revolutionise lightweight design in a perfect combination between simulation and design?
Lecture as part of the 4th CAE Forum in Landshut, near Munich, on 10 May 2016
Lecturer: Dr Claus Bayreuther, TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com 

Effiziente rechnergestützte Entwicklung von Karosseriekonzepten in Rahmenbauweise / Efficient, computer-based development of body-in-frame design concepts
Lecture as a part of the programme for the 10th Karosseriebautage in Hamburg, Germany, between 10 and 11 May 2016.
Speaker: Professor Dr Klemens Rother, University of Applied Sciences Munich, Dr Werner Pohl, FCM&S GmbH, Dr David Schneider, Dynardo GmbH and Qualified Engineer (Dipl.-Ing.) Udo Jankowski, Member of Management Board TECOSIM

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com 

Simulation
Lecture as a part of the programme for the SafetyUpDate in Aschaffenburg, Germany between 10 to 11 May 2016.
Speaker: Mark Gevers, qualified engineer (Dipl.-Ing.), TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com 

Parameterized optimization process with TEC|CONCEPT
Lecture as a part of the programme automotive CAE Grand Challenge in Hanau, Germany, between 12 to 13 April 2016.
Speaker: Dr Claus Bayreuther, TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com

Achieving lightweight design of wound filament reinforced composites through perfect interaction of simulation and design
Lecture as a part of the programme automotive CAE Grand Challenge in Hanau, Germany, between 12 to 13 April 2016. Speaker: Dr Claus Bayreuther, TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew(at)ven.tecosim.com 

Virtual Benchmark of NVH and acoustic performance
Lecture as a part of the programme automotive CAE Grand Challenge in Hanau, Germany, between 12 to 13 April 2016.
Speaker: Dr André Backes, TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com

Lightweight design and simulation: The perfect marriage
Lecture as a part of the programme for the Lightweight Design Summit in Würzburg, Germany, between 14 and 15 March 2016.
Speaker: Qualified Engineer (Dipl.-Ing.) Udo Jankowski, Member of Management Board TECOSIM

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com 

Virtuelles benchmarking - Numerische Simulation in der Praxis / Virtual benchmarking - Numerical simulation in practice
Lecture at the Humboldt-University in Berlin on 5 January 2016.
Speaker: Dr André Backes, TECOSIM Technische Simulation GmbH

The lecture transcript can be provided on request. Please contact c.kokew@ven.tecosim.com